Corner Spouted Stand Up Pouches with Handle for Liquid Detergent Packaging
Corner spout stand-up pouch in 120 micron PET/NY/RCPP, with handle and leak-resistant seal for liquid detergents, softeners and stain removers.
This is a stand-up pouch with the spout set into a corner rather than the top centre. The corner position lets the pack sit lower and pour more directly. The handle is integrated into the top seal, so the bag can be carried and tipped with one hand. The structure is PET/NY/RCPP at 120 micron: polyester outside for print and stiffness, nylon for puncture and flex resistance, and cast polypropylene inside for heat sealing and chemical resistance to surfactant-based liquids. The foil-free build gives a good moisture and aroma barrier for detergent bases, though not the absolute oxygen barrier of an aluminium laminate.
These pouches suit fabric softener, laundry detergent and stain remover refills, typically in 500 ml to 3 L formats. They run on standard horizontal fill-seal lines with a spout insertion and cap-closing station, and the flat base needs a few seconds of settling before the final seal. A corner spout is harder to fill than a top spout, so check your filler head clearance. Options that work here: a measured-dose cap, a hang hole, and a matt or gloss print finish. If you need full recyclability, a mono-PE structure is the better route, but it will not match the oxygen barrier of PET/NY/RCPP for aggressive or long-shelf-life formulas.
| Size | Customizable |
|---|---|
| Thickness | 120 micron (customizable） |
| Material | PET/NY/RCPP (customizable) |
| Color | Customizable |
| Product use | Fabric softener/ laundary detergent/stain removers |
| MOQ | From 100 pcs (digital printing) / 10,000 pcs (gravure) |
| Lead time | 10–15 working days after artwork approval |
Typical applications
- 500 ml fabric softener refill
- 1 L concentrated laundry detergent
- 750 ml stain remover liquid
- 2 L bulk detergent refill
- 250 ml travel detergent pouch
- 1.5 L pet stain cleaner
Frequently asked
Can this pouch hold a 2 L fill without the handle tearing?
Yes, if the handle is die-cut into the top seal area and the film is at least 120 micron. The PET/NY/RCPP build has enough tear strength for a 2 L fill, but the handle position must be set during plate or digital artwork approval. Test with your actual fill weight before committing to a full run.
What is the minimum order for a custom-printed corner spout pouch?
Digital print starts at 100 pcs, and rotogravure starts at 10,000 pcs. Digital runs ship in 10-15 working days after artwork approval, while rotogravure takes 20-25 working days. For a first trial, digital is the lower-risk route.
Will the corner spout fit my existing filling line?
Corner spouts sit lower than top spouts, so the filler head and cap-closing station need enough clearance and the right angle. Send your line layout and spout diameter before ordering. A stock sample pouch can be sent free so you can check fit on your equipment; you cover courier only.
Corner Spouted Stand Up Pouches with Handle for Liquid Detergent Packaging